| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0053 00
ITEM
INTERV L
A
MAN-
ITEM TO BE
PROCEDURE
EQUIPMENT
NO.
HOUR
CHECKED OR
NOT READY/
SERVICED
AVAILABLE IF:
32
Steering System
Before
0.5
a. Steering Pump
Inspect pumps and connecting hose
Class III leakage noted.
assemblies for leaks. Ensure that
pumps are properly mounted.
Both pumps do not
operate.
Before
0.2
b. Hydraulic
Check hydraulic fluid level. Check for
Class III leakage noted.
Reservoir
leakage or damage to reservoir. Replen-
ish fluid as necessary.
Reservoir is low or
empty.
33
Bilge System
Before
0.1
Bilge Pump
Inspect bilge pumps and hydraulic
Class III hydraulic
motors for secure mounting. Check
leakage noted.
for hydraulic fluid or bilge water
leakage.
Pump fails to function.
34
Hydraulic Starting
System
Before
0.5
a. Valves, Piping
Inspect valves, piping joints, and hose
Class III leakage noted.
Hoses, and
assemblies for damage or leakage.
Fittings
Before
0.5
b. Recharging
Inspect pump for leaks or damage.
Class III leakage noted.
Pump
Check that the pump is mounted
securely.
Before
0.5
c. Accumulator
Inspect accumulator and gauge connec- Class III leakage noted.
tions for leaks or damage.
Before
0.1
d. Reservoir and
Check tank level indicator. Replenish
Reservoir is low or
Filters
fluid as required.
empty.
Before
0.2
e. Control Valve
Check control valves and hydraulic
Class III leakage noted.
connections for leaks or damage.
Ensure that valves function normally in Valves do not function
LOCAL, REMOTE, and MANUAL
in all modes.
modes.
35
Raw Water System
Before
0.5
a. Piping, Hoses,
Inspect piping, especially connecting
Class III leakage noted.
and Valves
hoses for cracks, breaks, and leaks.
Before
0.5
Tighten hoses or clamps as necessary.
Before
0.2
b. Duplex Strainer
Check strainer for sediment and other
Strainer clogged with
foreign matter. Ensure that plastic
sediment or other
cylinder and screen are clean.
foreign matter.
0053 00-7
|
||
|
||
