| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0053 00
ITEM
INTERVAL
MAN-
ITEM TO BE
PROCEDURE
EQUIPMENT
NO.
HOUR
CHECKED OR
NOT READY/
SERVICED
AVAILABLE IF:
61
Bilge System
During
0.1
Bilge Pump
Inspect bilge pumps and hydraulic
Class III hydraulic
motors for secure mounting. Check
leakage noted.
for hydraulic fluid or bilge water
leakage.
Pump fails to function.
62
Raw Water System
During
0.2
Duplex Strainer
Check strainer for sediment and other
Strainer clogged with
foreign matter. Ensure that plastic
sediment or other
cylinder and screen are clean.
foreign matter.
63
During
0.1
Fuel Filter/Water
Inspect filter and connections for leaks. Class I, II, or III leakage
Separator
Inspect the clear bowl for accumulation noted.
of filtered deposits or water.
Bowl is cracked or
broken.
64
Engine Cooling
System
During
0.5
a. Piping, Hoses
Inspect pipe joints and hose connec-
Class III leakage noted.
and Valves
tions for cracks or leaks.
0.5
Tighten hoses or hose clamps as
necessary.
During
0.1
b. Expansion Tank
Inspect sight glass for coolant level
Class III leakage noted.
(1/2 full when cold). Replenish coolant
as necessary. Check tank for cracks,
Tank is not securely
leaks, or corrosion.
mounted.
65
Exhaust System
During
0.1
Mufflers, Piping,
Inspect for exhaust leaks, corrosion, or
Exhaust leaks.
and Lagging
other damage. Inspect for exposed
areas from missing lagging.
Missing lagging.
66
During
0.2
Stuffing Box
Inspect stuffing box for condition of
Excessive leakage.
packing and amount of leakage (2 to
3 drops per minute). Check gland for
excess heat by placing hand on gland.
Check flex hose and clamps for proper
installation and deterioration.
67
During
0.5
Air Conditioning
Inspect air conditioning raw water
Class III leakage noted.
Raw Water Piping, piping valves, strainers, hoses, and
Valves, Strainers,
fittings for leakage and damage.
Hoses, and
Fittings
68
During
0.5
Air Conditioning
Inspect pump for secure mounting,
Class III leakage noted.
Raw Water Pump
leaks, and damage.
0053 00-12
|
||
|
||
