| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
OPERATOR MAINTENANCE
FOR LANDING CRAFT, MECHANIZED (LCM-8) (ALL VESSELS WITH MOD 2 APPLICATION)
HYDRAULIC STARTING SYSTEM RESERVOIR AND FILTERS, SERVICE
INITIAL SETUP:
Materials/Parts:
Tools and Special Tools:
Hydraulic Fluid (Item 1, Table 2, WP 0230 00)
Tool Kit, Mechanic's Rail and Marine (Item 1,
Cleaning Solvent MIL-PRF-680 (Item 2, Table 2, WP 0230
Table 1, WP 0230 00)
Suitable Drain Pan
Gloves, Chemical Protective (Item 3, Table 2, WP 0230 00)
Goggles, Industrial, No Vents (Item 4, Table 2,
Equipment Condition:
Propulsion engines secured, locked out and
Rag, Wiping (Item 5, Table 2, WP 0230 00)
tagged out IAW FM 55-502
Filter Element (p/n 6R020-060, qty 1)
Packing, Preformed (p/n GA 100201, qty 1)
Personnel Required:
Two Watercraft Engineers, 88L
References:
FM 55-502
TM 55-1905-242-24P (WP 0016)
SERVICE
WARNING
Cleaning solvent is flammable and its vapor is potentially explosive. Do not use clean-
ing solvent in the vicinity of spark, open flame, or excessive heat. Do not use cleaning
solvent in unventilated spaces. Failure to comply can result in serious injury or death.
Do not allow used hydraulic fluid or cleaning solvent to come in contact with unpro-
tected skin or eyes. Prolonged skin contact can cause illness or injury. Eye contact can
cause serious injury. Always wear chemical protective gloves and goggles when han-
dling used hydraulic fluid and cleaning solvent. Failure to comply can result in illness,
serious injury, or death.
1.
Don chemical protective gloves and goggles.
2.
Close the starting system suction valve (1) located in the suction line from the tank.
3.
Position a suitable drain pan beneath the filter housing (2).
4.
Unscrew the filter housing (2) from the filter head (3).
5.
Remove and discard the preformed packing (4) and the filter element (5).
6.
Remove the seat guide (6) and spring (7) from the filter housing (2).
0055 00-1
|
||
|
||
