| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0058 00
INSTALLATION (continued)
7.
Install the cover (23) and secure it with the T-handle (22).
8.
OPEN the fuel supply valve CLOSED in step 1 Removal--Propulsion Engine Fuel Filter/Water Separator Replacement.
9.
Remove the lockouts and tagouts and run the propulsion engine, checking for fuel leaks.
10. If no leakage is detected, secure the engine and dispose of used diesel fuel, cleaning solvent, and contaminated materials
in accordance with local regulations.
SERVICE--DIESELGENERATOR FUEL FILTER/WATER SEPARATOR
1.
CLOSE the fuel supply valve upstream of the fuel filter/water separator.
2.
Don chemical protective gloves and goggles.
3.
Position a suitable drain pan beneath the fuel filter/water separator.
4.
Unscrew the filter element (24) from the filter base (25). Remove the filter element and O-ring (26).
32
33
33
25
31
31
26
29
30
24
28
27
5.
Unscrew the bowl (27) from the filter element (24). Remove the bowl and gasket (28).
6.
Clean the bowl (27) with cleaning solvent. Dry the bowl with clean wiping rags.
7.
Install a new gasket (28), and attach the bowl (27) to the new filter element (24).
8.
Prime the fuel filter/water separator by filling it with clean diesel fuel.
9.
Install the filter element (24) and bowl (27) onto the filter base (25) using a new O-ring (26).
10. OPEN the fuel supply valve CLOSED in step 1 of Service--Diesel Generator Fuel Filter/Water Separator.
11. Remove the lockouts and tagouts and run the diesel generator engine, checking for fuel leaks.
12. If no leakage is detected, secure the diesel generator engine and dispose of the used diesel fuel, cleaning solvent, and
contaminated materials in accordance with local regulations.
0058 00-4
|
||
|
||
