| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0072 00
SERVICE--STRAINERS (continued)
8.
Clean the inside of the reservoir (3) using wiping rags and cleaning solvent. It may be necessary to use a scraper or wire
brush to loosen deposits.
9.
Remove the filler/breather filter screen (7) and clean it with cleaning solvent. Inspect the screen for clogging or other
defects. If the screen is damaged or clogged, replace it.
10. Remove the suction strainers (8) and clean them with cleaning solvent. Inspect the strainers for clogging or other
defects. If a strainer is damaged or clogged, replace it.
11. Install the suction strainers (8) and filler/breather filter screen (7).
12. Install the tank inspection cover (5) and gasket (6) onto the reservoir (3).
13. Secure the tank inspection cover (5) to the reservoir (3) using the bolts (4).
14. Close the drain valve (2) and fill the reservoir (3) with new hydraulic fluid to the appropriate level as indicated on the sight
gauge (9).
15. If the filter is to be serviced, proceed to the Service--Filter procedure in this work package. If the filter is not to be
serviced, follow this procedure:
a.
Remove the lockouts and tagouts.
b.
Start the propulsion engines.
c.
Operate the steering system.
d.
Check the hydraulic fluid level and replenish as necessary.
e.
Dispose of the used hydraulic fluid, cleaning solvent, and contaminated materials in accordance with local regula-
4
tions.
5
6
7
3
9
8
2
1
0072 00-2
|
||
|
||
