| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
UNIT MAINTENANCE
FOR LANDING CRAFT, MECHANIZED (LCM-8) (ALL VESSELS WITH MOD 2 APPLICATION)
THROTTLE LINKAGE, ADJUST/REPLACE
INITIAL SETUP:
Tools and Special Tools:
Personnel Required:
Tool Kit, Mechanic's Rail and Marine (Item 1,
Two Watercraft Engineers, 88L
Table 1, WP 0230 00)
References:
Equipment Condition:
FM 55-502
Propulsion engines secured, locked out, and
TM 55-1905-242-24P (WP 0011)
tagged out IAW FM 55-502
GENERAL
The throttle linkage consists of the throttle cable extending from the pilothouse control head to the articulator and the control
unit, as well as the control rod assembly connecting the governor.
REMOVAL
1.
Disconnect the throttle cable from the control head in the pilothouse by using the following procedure:
a.
Remove the center access plate in the pilothouse console.
b.
Remove the nut (1) and bolt (2) from the cable connector (3).
c.
Remove the screws (4) from the cable clamp (5).
d.
Remove the throttle cable (6) from the throttle extension (7).
e.
Loosen the locknut (8) and remove the cable connector (3) from the throttle cable (6).
0083 00-1
|
||
|
||
