| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
UNIT MAINTENANCE
FOR LANDING CRAFT, MECHANIZED (LCM-8) (ALL VESSELS WITH MOD 2 APPLICATION)
HF/SSB RADIO TELEPHONE SEA330 CONTROLLER, REPLACE
INITIAL SETUP:
Tools and Special Tools:
Personnel Required:
Tool Kit, Mechanic's Rail and Marine
Two Watercraft Engineers, 88L
(Item 1, Table 1, WP 0230 00)
References:
Multimeter (Item 2, Table 1, WP 0230 00)
FM 55-502
Equipment Condition:
TM 55-1905-242-24P (WP 0042)
SEA 330 MF/HF RADIO circuit breaker set to OFF,
locked out, and tagged out IAW FM 55-502
REMOVAL
WARNING
Replace or repair components only after the affected circuit has been secured, locked
out, and tagged out. Performing replacement with the circuit energized may result in
damaged equipment and serious injury or death to personnel.
1.
Remove the two knobs (1) that secure the radio telephone controller (2) to its mount (3).
2.
Set the multimeter to the Vdc (Volts direct current) setting and check for voltage. If no voltage is noted, proceed to the
next step. If voltage is noted, ensure that the circuit breaker is properly secured.
3.
Label and disconnect the wiring from the rear of the radio telephone controller (2).
0113 00-1
|
||
|
||
