| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0158 00
ASSEMBLY
1.
If the spring (12) and spacers (13) were removed, position them on the rod (14) and secure them with the attaching
screw (15).
2.
Coat the O-ring (16) with a light coat of hydraulic fluid and slide it into position on the rod (14).
3.
Apply a light coat of hydraulic fluid to the rod (14) and slide it into the cup end of the valve body (8).
4.
Secure the cup (10) to the valve body (8) with the attaching screws (9).
5.
Apply a light coat of hydraulic fluid to the support end O-ring (17).
6.
Slide the support end of the O-ring (17) and the spacer (18) into position on the rod (14).
7.
Position the support (3) on the valve body (8) and secure it with the attaching screws (7).
8.
If the actuator (2), lever (4), and knob (5) were disassembled, assemble them and secure them with the locknuts (6).
9.
Position the actuator (2) in the support (3) and secure it with the pin (1).
10. Slide the boot (19) into place.
11. Remove the lockouts and tagouts and check the operation of the system, ensuring that all crane functions operate
correctly and that no leakage is noted.
12. Dispose of used hydraulic fluid, used cleaning solvent, and contaminated materials in accordance with local regulations.
END OF WORK PACKAGE
01580158 00-3
00-3/4 blank
|
||
|
||
