| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0167 00
DISASSEMBLY (continued)
6.
Remove the nut (9), washer (10), and screw and washer assembly (11) from the body (8).
7.
Remove the handle (12) from the body (8).
CLEANING
1.
Clean all parts in fresh water.
2.
Inspect all parts for wear, deformity, or damage. Replace all of the cylinder gaskets (4) and any other worn, deformed, or
damaged parts.
ASSEMBLY
1.
Install the threaded rod (7) into the body (8).
2.
Position a cylinder gasket (4) in place on the body (8) and insert the strainer screen (6) over the threaded rod (7).
3.
Place the lucite cylinder (5) on the body (8).
4.
Place a new cylinder gasket (4) in the end cap (3).
5.
Install the end cap (3) onto the lucite cylinder (5) and secure it with the lockwasher (2) and wing nut (1).
6.
Assemble the other end of the strainer in the same manner.
7.
Install the handle (12) on the body (8) using the nut (9), washer (10), and screw and washer assembly (11).
8.
Remove the lockouts and tagouts and check the operation of the system.
END OF WORK PACKAGE
0167 00-2
|
||
|
||
