| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
DIRECT SUPPORT MAINTENANCE
FOR LANDING CRAFT, MECHANIZED (LCM-8) (ALL VESSELS WITH MOD 2 APPLICATION)
RAW WATER SYSTEM DUPLEX STRAINER, REPAIR
INITIAL SETUP:
Tools and Special Tools:
Personnel Required:
Tool Kit, Mechanic's Rail and Marine
Two Watercraft Engineers, 88L
(Item 1, Table 1, WP 0230 00)
Materials/Parts:
Equipment Condition:
Gasket Cylinder (p/n 10, qty 4)
Propulsion engines secured, locked out, and
tagged out IAW FM 55-502
References:
Raw water duplex strainer removed
FM 55-502
TM 55-1905-242-24P (WP 0049)
REPAIR
Repair of the duplex strainer is accomplished by the replacement of its component parts as required.
DISASSEMBLY
NOTE
Cotter pins, lockwashers, locking nuts, and similar locking devices shall be discarded after removal and replaced with
new cotter pins, lockwashers, locking nuts and similar locking devices.
1.
Loosen and remove the wing nut (1), lockwasher (2), end cap (3), and cylinder gasket (4) from the lucite cylinder (5).
2.
Lift the strainer screen (6) off the threaded rod (7).
3.
Remove the lucite cylinder (5) and the cylinder gasket (4) from the body (8).
4.
Remove the threaded rod (7).
5.
Disassemble the other end of the duplex stainer in the same manner.
0167 00-1
|
||
|
||
