Tweet |
Custom Search
|
|
|
||
TM 55-1905-242-14
GENERAL SUPPORT MAINTENANCE
FOR LANDING CRAFT, MECHANIZED (LCM-8) (ALL VESSELS WITH MOD 2 APPLICATION)
HYDRAULIC STARTING SYSTEM RECHARGING PUMP, REPAIR
INITIAL SETUP:
Tools and Special Tools:
Materials/Parts: (continued)
Tool Kit, Mechanic's Rail and Marine (Item 1,
Goggles, Industrial, No Vents (Item 4, Table 2,
Table 1, WP 0230 00)
Vise (Item 3, Table 1, WP 0230 00)
Rag, Wiping (Item 5, Table 2, WP 0230 00)
Installer, Recharging Pump Shaft Seal (Item 13,
Grease (Item 21, Table 2, WP 0230 00)
Table 1, WP 0230 00)
O-Ring (p/n GA1129-2, qty 1)
Packing, Preformed (p/n GA1129-4, qty 1)
Equipment Condition:
O-Ring (p/n GA1129-1, qty 2)
Propulsion engines secured, locked out, and
Retainer, Packing (p/n RG100157, qty 2)
tagged out IAW FM 55-502
O-Ring (p/n GA1129-7, qty 1)
Recharging pump removed (WP 0086 00)
Seal, Oil (p/n SE100082, qty 1)
Packing (p/n GA1129-5, qty 1)
Personnel Required:
Seal, Oil (p/n SE1047, qty 1)
One Watercraft Engineer, 88L
References:
Materials/Parts:
Hydraulic Fluid (Item 1, Table 2, WP 0230 00)
TM 55-1905-242-24P (WP 0014)
Cleaning Solvent MIL-PRF-680 (Item 2, Table
2, WP 0230 00)
Gloves, Chemical Protective (Item 3, Table 2,
DISASSEMBLY
WARNING
Cleaning solvent is flammable and its vapor is potentially explosive. Do not use clean-
ing solvent in the vicinity of spark, open flame, or excessive heat. Do not use cleaning
solvent in unventilated spaces. Failure to comply can result in serious injury or death.
Do not allow hydraulic fluid or cleaning solvent to come in contact with unprotected
skin or eyes. Prolonged skin contact can cause illness or injury. Eye contact can cause
serious injury. Always wear chemical protective gloves and goggles when handling
used hydraulic fluid and cleaning solvent. Failure to comply can result in illness, seri-
ous injury, or death.
1.
Don chemical protective gloves and goggles.
2.
Clamp the pump assembly (1) in a vise.
3.
Remove the pipe plug (2) and setscrew (3) from the drive assembly (4).
0195 00-1
|
||