| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0207 00
DISASSEMBLY (continued)
6.
Remove the cylinder (6) from the end cap cover (10).
7.
Remove the cartridge retaining plate (7) and head end cover (8) from the piston rod (1).
8.
Remove the rod wiper (11), bearing cartridge (12), and rod bearing (13) from the head end cover (8).
9.
Remove the rod packing retaining ring (14) and rod packing (15).
10. Remove the O-rings (16 and 17) and gasket (18) from the head end cover (8).
11. Remove the O-ring (19) and gasket (20) from the end cap cover (10).
12. Remove the piston retaining lockscrew and unscrew the piston (9) from the piston rod (1).
13. Remove the piston ring packing (21) and O-ring (22) from the piston (9).
14. Remove the tie rods (23) from the end cap cover (10) only if the tie rods or end cap cover will be replaced.
15
7
13
8
10
23
22
1
11
2
12
17
14
9
16
18
4
5
6
19
3
21
20
CLEANING
1.
If not already on, don protective gloves and goggles.
2.
Clean all metallic parts in cleaning solvent and dry with clean wiping rags.
INSPECTION
1.
Inspect the piston rod and cylinder bore for wear and scoring.
2.
Inspect threaded parts for thread damage.
3.
Inspect end covers for nicks, burrs, cracks, or other damage.
4.
Replace damaged parts with new.
0207 00-2
|
||
|
||
