| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0210 00
INSTALLATION--RUDDER
WARNING
Use several crewmembers to lift heavy loads. Heavy loads can crush. Do not allow any
body parts to come under the load or between the load and a stationary object. Failure
to comply can result in serious injury or death.
1.
Using sufficient manpower, slide the rudder assembly (10) forward onto the skeg bar (11) and secure the rudder shoe
casting (4) loosely to the skeg bar with the nuts (2) and bolts (3). Do not tighten the nuts.
2.
Align the upper flange (8) to the lower flange (9) and secure them with the nuts (5), washers (6), and bolts (7). Tighten
the nuts securely.
3.
Tighten the nuts (2) that secure the rudder shoe casting (4) and secure the nuts with the cotter pins (1).
REMOVAL--TIE ROD AND CYLINDER ASSEMBLY
1.
Remove the clevis pin (12) from the starboard tie rod end (13) and remove the starboard tie rod end from the
starboard crank (14).
2.
Repeat step 1 for the port side.
3.
Remove the tie rod (15).
4.
Remove the steering cylinders (WP 0178 00).
5.
Remove the rudder angle transmitter from the rudder stock (WP 0184 00).
14
12
13
15
0210 00-2
|
||
|
||
