| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0210 00
INSTALLATION--TIE ROD AND CYLINDER ASSEMBLY
1.
Install the steering cylinders (WP 0178 00).
2.
Position the tie rod (15) on the cranks (14).
3.
Install the clevis pin (12) in the starboard tie rod end (13) to secure the starboard tie rod end to the starboard
crank (14).
4.
Repeat step 3 for the port side.
5.
Install the rudder angle transmitter on the rudder stock (WP 0184 00).
REMOVAL--RUDDER STOCK
1.
Remove the nuts (16), washers (17), and bolts (18) from the crank assembly (14).
2.
Remove the crank assembly (14) from the upper rudder stock (19).
3.
Remove the cotter pin (20) and nut (21) from the upper rudder stock (19).
4.
Remove the flange mounting nuts (22), washers (23), and bolts (24).
5.
Separate the lower thrust flange (25), upper thrust flange (26), and thrust bearing (27).
6.
Remove the stuffing box mounting nuts (28), bolts (29), and gasket (30) from the stuffing box (31).
7.
Remove the packing gland jam nuts (32) and hex nuts (33) from the packing gland (34).
8.
Remove the packing gland (34) and flax packing (35) from the stuffing box (31).
24
20
21
23
26
25
22
27
17
14
16
18
19
32
33
31
34
29
35
30
28
36
37
0210 00-3
|
||
|
||
