| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0216 00
DISASSEMBLY--PRIMARY PLANET ASSEMBLY
NOTE
It is recommended that if this assembly does not function properly, or is worn, it should
be traded in for a complete new assembly. If the assembly is to be disassembled, do so
only if a clean, dust free work area is available.
1.
Remove the bushing (34).
2.
Using a 3/16 inch diameter pin punch, drive the pin (35) into the primary planet pin (36) until in can be removed with the
primary planet pin.
3.
Remove the primary planet pin (36) by tapping it out of the planet hub (37) so that it is removed from the side of the planet
hub that carried the bushing (34).
4.
Remove the thrust plug (38) from the primary planet pin (36).
5.
Remove the planet gear (39) with the needle bearing (40).
6.
Repeat steps 2-5 for the remaining planet gears (39).
7.
After all the planet gears (39) have been removed, remove the thrust pad (41) and O-ring (42) from the planet hub (37).
26
38
39
40
36
35
42
37
41
34
0216 00-5
|
||
|
||
