| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
GENERAL SUPPORT MAINTENANCE
FOR LANDING CRAFT, MECHANIZED (LCM-8) (ALL VESSELS WITH MOD 2 APPLICATION)
RAMP SHEAVES AND CABLES, REPLACE
INITIAL SETUP:
Tools and Special Tools:
Personnel Required:
Tool Kit, Mechanic's Rail and Marine (Item 1,
Three Watercraft Engineers, 88L
Table 1, WP 0230 00)
Materials/Parts:
Equipment Condition:
Gloves, Anti-Flash (Item 13, Table 2, WP 0230 00)
Vessel in drydock or beached
References:
Ramp fully lowered, resting on drydock or beach
TM 55-1905-242-24P (WP 0097)
REMOVAL--RAMP CABLE
WARNING
Always wear leather gloves when handling wire rope. Handling wire rope with bare
hands can cause serious injury or death to personnel.
NOTE
Cotter pins, lockwashers, locking nuts, and similar locking devices shall be discarded after removal and replaced with
new cotter pins, lockwashers, locking nuts and similar locking devices.
1.
Remove the bolts (1) that secure the access plate (2) to the bulkhead. Remove the access plate.
2.
Remove the cotter pin (3), nut (4), and bolt (5) that secure the ramp cable (6) to the dead head assembly (7). Remove the
ramp cable from the deadhead assembly.
1
2
7
3
4
5
6
0219 00-1
|
||
|
||
