| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
GENERAL SUPPORT MAINTENANCE
FOR LANDING CRAFT, MECHANIZED (LCM-8) (ALL VESSELS WITH MOD 2 APPLICATION)
RAMP SEAL, REPLACE
INITIAL SETUP:
Tools and Special Tools:
Personnel Required:
Tool Kit, Mechanic's Rail and Marine (Item 1,
Two Watercraft Engineers, 88L
Table 1, WP 0230 00)
Materials/Parts:
Equipment Condition:
Adhesive (Item 26, Table 2, WP 0230 00)
Vessel in drydock or beached
References:
Ramp fully lowered, resting on drydock or beach
TM 55-1905-242-24P (WP 0097)
REMOVAL--SIDE SEALS
1.
Using a heavy scraper, remove the seal (1) from the sealing bar (2).
2.
Thoroughly remove all of the old seal (1) from the sealing bar (2).
2
1
3
4
3
INSTALLATION--SIDE SEALS
1.
Apply a coat of adhesive to the sealing bar (2) and to the side of the seal (1) that will be attached to the sealing bar.
2.
Allow the adhesive to set up to a "tacky" state.
3.
Install the seal (1) to the sealing bar (2) and allow the adhesive to cure for 12 to 24 hours before closing the ramp.
0220 00-1
|
||
|
||
