| Tweet |
Custom Search
|
|
|
||
 Figure 3-35. Strainer location (typical)
b. Sea Valves.
salt water circulating or standby pump is slow in
discharging water
(1) Inspect the sea valve for leaks.
d. Strainers. Inspect and clean all circulating
(2) Tighten nuts (fig. 3-34) evenly to stop
water strainer (fig. 3-35) screens and by-passes. Note
leaking.
If leak cannot be stopped, notify higher
maintenance
the condition of mesh of screens or baskets, and replace
c. Sea Chests. The sea chests must be blown
if defective.
out with ships service air frequently, and any time the
3-77
|
||
|
||
