| Tweet |
Custom Search
|
|
|
||
 TM 55-1925-204-12
Figure 5-4. Raw water pump, lines, and rocker arm cover
(b) Remove mounting capscrews, then
(1) Removal. Shutoff the fresh and raw water
lift the raw water pump from the engine.
supply to the engine (table 2-3), and proceed as follows:
(2) Installation. Install the raw water pump by
(a) Drain the engine cooling system.
(b) Loosen hose clamps (fig. 5-5) and
reversing the procedures in step (1), and tightening the
remove hose connection.
capscrews.
f. Fresh Water Pump. The fresh water pump
circulates fresh water from the heat exchanger through
the engine.
5-5
|
||
|
||
