| Tweet |
Custom Search
|
|
|
||
 Figure 5-18. Measuring piston ring end gap.
(9)
Check ring side clearance in piston grooves
ring ................................ ........................ 0.006 to 0.0085 inch.
with a thickness gage (fig. 5-19). Ring clearance in grooves
(d) Lower compression
should be as follows:
ring ................................ ........................ 0.006 to 0.0085 inch.
(a) Upper compression
(e) Upper oil control
ring ................................ ....................... 0.010 to 0.0125 inch.
ring ................................ ....................... 0.0015 to 0.0055 inch.
(b) Second compression
(f) Lower oil control
ring ................................ ....................... 0.008 to 0.0105 inch.
ring ................................ ....................... 0.0015 to 0.0055 inch.
(c) Third compression
5-22
|
||
|
||
