| Tweet |
Custom Search
|
|
|
||
 compressor unit is located in the engineroom, near the
(b) Install new V-belt on pulleys, move
motor away from compressor until V-belt will depress
refrigerator compressor unit. The unit is provided with
an automatic cycling device to maintain constant
only l/4 inch midway between pulleys, then tighten motor
mounting hardware.
storage temperature; a temperature selector; a warning
device to indicate undue temperature rise in the storage
d. Freezer . The freezer contains 18 cu ft of
compartment, and a thermal overload cutout with
space for frozen food; will maintain an average
automatic reset for the motor.
temperature of -5 . to -2 . without load, when the
F
F
ambient temperature is 120 . (fig. 5-117). The
F
Figure 5-117. Freezer for cold storage of food.
(1)
Cleaning and inspection.
Perform the
(2) Belt adjustment and replacement. Perform
cleaning and inspection as described for the refrigerator
similar procedures as described in c.(2) above.
in c.(1) above.
5-167
|
||
|
||
