| Tweet |
Custom Search
|
|
|
||
 (c) Unscrew the valve or fitting.
(2) Inspection.
Inspect operation of all
components frequently. Lubricate in accordance with LO 55-
(2) Installation. Install valve or fitting by reversing
1925-204-12-3.
the removal procedures. Seal all threads with a sealing
compound.
(3) Repair.
Repair by replacing a defective
component.
d. Steering Console. The steering console components
require little if any maintenance other than cleaning and
inspecting for leaks of the hydraulic lines. On rare occasions
5-99. Gear Boxes, Universal Joints, and Couplings
a bearing, bushing, or gear may require replacement. Never
a. General. Miter gear boxes, universal joints, and
disassemble farther than the defective part.
couplings provide the change of direction necessary to control
(1) Cleaning. Keep the interior of console clean
the rudder from the pilothouse steering console. Figure 5-127
by use of low pressure compressed air, or with a lint free cloth
outlines the use of these items between console and
dampened with FED SPEC P-D-680 solvent.
differential control.
1.
Universal joint
5. Coupling
2.
Gear unit, 3-way
6. Coupling
4.
Universal joint
7. Universal joint
4.
Coupling
5-183
|
||
|
||
