| Tweet |
Custom Search
|
|
|
||
 TM 55-1925-273-10-1
0067 00
ANCHOR WINDLASS
OPERATION:
Powered Wildcats
1.
Ensure control lever is in the neutral position.
2.
Activate central hydraulic system (see motorized hydraulic power unit operating instructions).
3.
Select speed range, LSHT or HSLT.
4.
Engage Dog Clutch
a.
Loosen both wing nuts on face of shifting ring.
b.
Insert special tool in nearest slot in clutch shifting ring.
c.
Push forward (50 movement of clutch shifter ring is required to fully engage or disengage Dogs).
5.
Remove chain stoppers if set.
6.
Release band brake.
7.
Operate control lever for desired speed and direction.
Gypsey Heads Only
1.
Ensure control lever is in the Neutral position.
2.
Activate central hydraulic system.
3.
Engage band brake and set chain stoppers.
4.
Disengage Dog Clutch.
5.
Select speed range.
6.
Operate control/ever for desired speed and direction.
Free Wheeling
1.
Remove chain stoppers.
2.
Disengage Dog Clutch.
3.
Release band brake to allow anchor to free fall. Manipulate brake to retard or stop the anchor as desired.
Caution: During free falling, carefully observe speed to prevent chain from "Jumping the Cat" due to centrifugal
force. Apply brake slowly or chain may jump a link.
LSHT: Low Speed High Torque (For Heavy Loads)
HSLT: High Speed Low Torque (For Normal Loads and Speeds)
Placard 32. Anchor Windlass
0067 00-41
|
||
|
||
