| Tweet |
Custom Search
|
|
|
||
 TM 55-1925-273-10-1
0069 00
MAIN ENGINE
2
Engine
FWD
Room
MAIN ENGINE
1
FO-21
1
SSDG 1
FWC-11
2
FWC-9
3
FO-15
FO-35
4
5
7
6
Figure 11. Fuel Oil Service and Fresh Water Cooling System Valve Locations
b.
On the SSDG 1 engine control panel, turn the emergency stop pushbutton (figure 12, item 3) clockwise to release
it to the OUT position.
! CAUTION
Verify that the engine has oil available by checking the engine lube oil sump level. Check for the
presence of cooling water in the sight glass of the head tank. Operating the engine without lube
oil or cooling water will result in engine damage.
Do not engage the starter when the flywheel is moving. Failure to comply will result in engine
damage.
If oil pressure does not rise within 15 seconds, stop the engine using the emergency stop switch,
or damage to the engine could result.
NOTE
When the engine reaches 600 r/min and oil pressure is approximately 22 PSI (1.5 bar), the starter
motor will automatically disengage.
c.
Turn the START switch to the START position. When the engine starts, release the START switch (figure 12,
item 4).
0069 00-7
|
||
|
||
