| Tweet |
Custom Search
|
|
|
||
 TM 55-1925-273-10-1
0082 00
21
19
11
24
4
2
5
14
Mode
WAKE
72
76
Off
Tu
10
AM
TIME
68 6:00
COOL
Fan
16
Clean Filter
AUTO
Programming
HEAT
22
17
COPYPREVIOUS DAY
PROGRAM
MODE
7
13
8
CHANGE DAY
END
FAN
15
9
SET TIME/TEMP
RESET FILTER
HOLD
23
3
12
6
18
25
20
1
Figure 24. Pilothouse Rooftop Air Conditioning Thermostat
NOTE
When the fan is in the AUTO mode, the fan only operates as required to maintain the set tempera-
ture. When the fan is in the ON mode, the fan will operate continuously regardless of the tem-
perature setting.
9.
Press the FAN button (figure 24, item 15) on the thermostat (figure 24, item 2) to move the fan setting between ON
(figure 24, item 19) and AUTO (figure 24, item 17) on the FAN display (figure 24, item 16).
10. CLOSE the cover (figure 24, item 1) of the thermostat (figure 24, item 2).
THERMOSTAT OPTIONS
SETTING THE COMFORT SCHEDULE
1.
OPEN the cover (figure 24, item 1) of the thermostat (figure 24, item 2).
NOTE
The programming process always starts at the current time and day. If it is desired to start the
program at a different day or time period, press the program button until the desired time period
(WAKE, DAY, EVE, or SLEEP) is displayed on the Liquid Crystal Display (LCD). Each day of
the week is divided into four time periods (WAKE, DAY, EVE, and SLEEP). Programming
should be set for each time period. During the programming process if the buttons are not
touched or no entries are made within a three minute window, the program mode will automati-
cally shut off. All programmed information will be saved.
2.
Press the program button (figure 24, item 17) on the thermostat (figure 24, item 2). The word PROGRAMMING will
be displayed in the PROGRAMMING display (figure 24, item 18). The word TIME (figure 24, item 7) will flash. The
word WAKE, DAY, EVE, or SLEEP will be displayed in the STATUS display (figure 24, item 19). The current day will
be displayed (figure 24, item 4) with a two letter abbreviation.
0082 00-30
|
||
|
||
