| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-2
2-53.
BOW RAMP (Cont).
The following is an index to the procedures.
DESCRIPTION
PARAGRAPH
Lowering Bow Ramp - Remote
Raising Bow Ramp - Remote
Lowering Bow Ramp- Local
Raising Bow Ramp - Local
2-54.
LOWERING BOW RAMP-REMOTE.
Remote operation from, the pilothouse. To operate the winch and lower the bow ramp, proceed as follows:
NOTE
Perform all before operations on the Preventive Maintenance Checks and Services Table.
a. Winch Compartment:
(1) Remove pawl locking pin (1) and place pawl (2) in the disengaged position. Pawl must be open before winch
is started.
(2) Turn mechanical brake wheel (3) counter-clockwise to unlock winch.
(3) Place lever on disconnect switch (4) in the ON position.
(4) Turn local/remote switch (5) to remote position on the local control switch.
(5) Check that the hand crank (6) has been removed and that hand crank switch (7) is locked in position for
electrical operation.
2-427
|
||
|
||
