| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-11
CAUTION
Do not over tighten. PVC fittings may crack.
(3) Make sure the connections are aligned with their respective hose connections.
d. Install the inlet hose (2, FIGURE 2-20) and clamps (1). Tighten to 40 in-lb.
e. Connect the outlet hose (5, FIGURE 2-20) with hose clamps (4). Tighten the clamps to 40 in-lb.
f. Connect the electrical cable to the pump system (paragraph 2-18).
g. Open the following valves:
(1) Sewage inlet and outlet
(2 Bleach metering
(3) Backwash water supply
h. Restore electrical power, start the unit, and conduct run check (paragraph 2-6).
2-76
|
||
|
||
