| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
4.
Using 3/4 inch open end wrench remove split coupling (4) securing cable (5).
5.
Turn crank (3) clockwise until end of cable (5) is free.
6.
Open access panel under control tie (refer to paragraph 3-154).
Using screwdriver and 10 mm open end wrench remove four screws (6), nuts (7) and washers (8) securing scoop
7.
control housing (9) to console.
Remove scoop control housing (9).
8.
Using 3/4 inch open end wrench remove split couplings (10) securing cables (11) to control head (14) behind con-
9.
sole.
Using screwdriver and 10 mm open end wrench remove four screws (12) and nuts (13) securing scoop control
10.
head (14) to console.
Pull scoop control head (14) from console.
11.
Rotate levers (15) forward until cable ends (11) are free.
12.
Remove aft cockpit (refer to paragraph 3-27).
13.
Remove portside buoyancy flotation material (refer to paragraph 3-152).
14.
3-72
|
||
|
||
