SCOOP CONTROL CABLE REPLACEMENT INSTRUCTIONS (PORT AND STARBOARD)

Custom Search

ADJUST-cont.

TM-5-1940-277-20 Boat Bridge Erection Twin Jet Aluminum Hull MODEL USCSBMK1 (1940-01-105-5728) MODEL USCSBMK2 (1940-01-218-9165) Manual

REMOVE

TM 5-1940-277-20

TM 1940-20/2

3-36. SCOOP CONTROL CABLE REPLACEMENT INSTRUCTIONS (PORT AND STARBOARD)

TOOLS: 1/2 inch Box Wrench

3/4 inch Open End Wrench

Flat Tip Screwdriver

10 mm Open End Wrench

PARTS/MATERIALS: Bucket Control Cable

Two Feet, Solid Wire (Recommend 18 Gage)

NOTE

Port bucket control cable is 27" 10" in length. Starboard bucket control cable is 31'5" in

length.

PERSONNEL REQUIRED: Three

Set master switch to "OFF". Shock and bums may result.

REMOVE:

Open and secure hydrojet hatches (refer to paragraph 3-154).

Using 1/2 inch box wrench remove self-locking nut (1) securing rotary control rod (2).

Slide control rod (2) off crank (3).

3-71