REPLACE FUEL PRIME PUMP ASSEMBLY

Custom Search

REPLACEMENT

TM-5-2010-205-14 Propelling Unit Outboard NSN 2010-01-251-2227 Manual

Figure 4-7. Fuel Prime Pump Assembly

TM 5-2010-205-14

4-18. REPLACE FUEL PRIME PUMP ASSEMBLY

This Task Covers: a. Inspect

b. Replacement

INITIAL SETUP

Tools Required

Equipment Conditions

Tool Kit, General

Engine Shutdown (para 2-11).

Battery Disconnected (para 4-58).

Item 1)

Materials/Parts Required

Personnel Required

1 person

Item 3)

Gasket sealant (Appendix E,

Item 6)

Gasket P/N 1P0436

INSPECT

CAUTION

Before any service work is done on the fuel system, the outer surface of the fuel prime

pump housing must be cleaned.

1. Inspect for leaks around gaskets (4) on pump (1).

2. Check for loose bolts (2).

REPLACEMENT

1. Remove fuel line (3).

2. Remove screws (2) and washers (5).

3. Remove pump assembly (1) from fuel filter housing (6).

4. Remove gasket (4) from housing.

5. Install new gasket.

6. Install pump assembly.

7. Install screws and washers.

8. Install new fuel filter cartridge (7).

4-25