PAIR/REPLACE CONNECTION ASSEMBLY

Custom Search

Figure 4-13. Water Lines

TM-5-2010-205-14 Propelling Unit Outboard NSN 2010-01-251-2227 Manual

Figure 4-14. Connection Assembly

TM 5-2010-205-14

4-26. PAIR/REPLACE CONNECTION ASSEMBLY

This Task Covers: a. Inspect

b. Repair

c. Replacement

INITIAL SETUP

Tools Required

Equipment Conditions

Tool Kit, General Mechanics

Engine Shutdown (para 2-11).

Battery Disconnected (para 4-58).

Materials/Parts Required

Personnel Required

1 person

Item 3)

INSPECT

1. Inspect for loose bolts (2) typical.

2. Inspect for loose hose clamps (9) typical.

3. Inspect for loose pipe fittings (1) typical.

4. Inspect for leaks.

REPAIR

Repair is limited to the replacement of defective parts.

REPLACEMENT

1. Loosen retaining clamp (8) if installed.

2. Loosen fitting or clamp.

NOTE

If pipe tee (4) is to be removed and replaced, proceed to steps 4 through 9.

3. Remove damaged line.

4. Loosen and remove lines (3, 5, and 7).

5. Loosen and remove nut and washer (6).

6. Remove pipe tee (4).

4-37