| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
4-55. REPLACE HYDRAULIC HOSE AND VALVE ASSEMBLY
This Task Covers: a. Inspect
b. Replacement
INITIAL SETUP
Tools Required
Equipment Conditions
Tool Kit, General Mechanic
Engine Shutdown (para 2-11).
(Appendix B, Item 1)
Battery Disconnected (para 4-58).
Materials/Parts Required
Personnel Required
Cotton Rags (Appendix E,
1 Person
Item 3)
Masking Tape (Appendix E,
Item 8)
INSPECT (Figure 4-44.)
1. Inspect all hoses for loose connections.
2. Inspect for loose bolts on valve connections.
3. Inspect for leaks.
4. Inspect for obvious damage.
REPLACEMENT
CAUTION
After disconnecting a hydraulic, fuel, or lubrication line, plug or tape openings immediately.
NOTE
Before disconnecting any fuel, hydraulic, or lubricating line, clean area thoroughly.
NOTE
Leave all new hoses, fittings, and valves in their containers until ready for assembly.
4-96
|
||
|
||
