REPLACEMENT - TM-5-2010-205-140177

Custom Search

REPAIR/REPLACE ENGINE ASSEMBLY

TM-5-2010-205-14 Propelling Unit Outboard NSN 2010-01-251-2227 Manual

Figure 5-3. Engine and Framework Assembly

TM 5-2010-205-14

REPLACEMENT

1. Remove hydraulic pump assembly (para 5-25).

2. Disconnect fuel lines (9) and (10).

3. Disconnect ground wire (11).

4. Loosen connection of exhaust assembly (4) at turbocharger (7).

5. Disconnect hoses from seawater pump (6).

6. Disconnect battery cables (para 4-58).

7. Loosen and remove engine support bolts (5).

8. Sling engine at lifting lugs (8) and lift from framework.

9. Lower engine into framework.

10. Install and tighten support bolts (5).

11. Connect battery cables.

12. Connect seawater pump hoses.

13. Connect exhaust system to turbocharger (4).

14. Connect ground wire (11).

15. Install hydraulic pump assembly.

5-8