| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
5-11.
EXPANSION TANK ASSEMBLY
This Task Covers:
a. Test
INITIAL SETUP
Tools Required
Equipment Conditions
Cooling System Pressurizing
Engine Shutdown (para 2-11).
Pump Group (Appendix B,
Battery Disconnected (para 4-58).
Item 7)
Materials/Parts Required
Personnel Required
Cotton Rags (Appendix E,
1 Person
Item 3)
TEST
WARNING
Use caution when removing the expansion tank cap while the engine is
still hot.
WARNING
To prevent burns and to prevent damage to the engine, do not add
coolant to an overheated engine.
Allow the engine to cool first.
NOTE
If the engine has been operated and the coolant is hot, loosen pressure
cap to first stop and let pressure out of system.
1.
Remove pressure cap (2) from tank (1).
2.
Install pressure cap on pressurizing pump.
3.
Increase pump pressure and note pressure that opens cap.
5-22
|
||
|
||
