| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
5-22.
REPLACE ENGINE SUPPORT ASSEMBLY
This Task Covers:
a. Replacement
INITIAL SETUP
Tools Required
Equipment Conditions
Tool Kit, General Mechanics
Engine Shutdown (para 2-11).
(Appendix B, Item 1)
Battery Disconnected (para 4-58)
Hoist (Appendix B, Item 4)
Hand Pump Removed (para 4-60).
Materials/Parts Required
Personnel Required
Cotton Rags (Appendix E,
2 Persons
Item 3)
Engine Support Bracket
P/N 9N5799
REPLACEMENT
1.
Loosen front engine support bolts (2).
2.
Remove engine mount bolts (6), and washers (5).
3.
Remove bracket bolts (4) and washers.
4.
Raise engine with hoist approximately 1/8 inch.
5.
Remove engine support bracket (1).
6.
Install new engine support bracket (1).
7.
Install engine mount, washers (3), and bolts (4).
8.
Lower engine.
9.
Install and tighten washers (5) and bolts (6).
10. Tighten bolts (2).
5-46
|
||
|
||
