| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
5-24. REPAIR STARTER MOTOR ASSEMBLY
This Task Covers: a. Repair
INITIAL SETUP
Tools Required
Equipment Conditions
Tool Kit, General Mechanics
Engine Shutdown (para 2-11).
(Appendix B, Item 1)
Battery Disconnected (para 4-58).
Starter Removed (para 4-44).
Materials/Parts Required
Personnel Required
Cotton Rags (Appendix E,
1 Person
Item 3)
Cleaning Solvent (Appendix E,
Item 1)
Brush, Wire Scratch (Appendix D)
Parts Kit, Electric P/N 8T9885
Parts Kit, Electric P/N 7T3267
Parts Kit, Electric P/N 8T9884
Parts Kit, Electric P/N 7T3268
REPAIR (Figure 5-21.)
1. Repair is limited to the replacement of defective parts.
2. Remove nuts (16), washers (17), and washers (15).
3. Remove insulation, bushing, and spacer (18).
4. Remove screws (14).
5. Remove housing cap (13).
6. Remove terminal (12), O-ring (11), and holder (8) from cap (13).
7. Remove screw (10) from brush (9).
8. Remove spring (19).
9. Pull housing (7) from armature assembly (20).
10. Remove bushing (20), washer (21), and screws (3).
11. Remove shoe (4), insulator (2), and spacer (6).
12. Separate armature (1) from coil (5).
5-50
|
||
|
||
