| Tweet |
Custom Search
|
|
|
||
 TM 5-2805-261-13
4-15. MANUAL STARTER DISASSEMBLY/CLEANING/INSPECTION/REASSEMBLY
This task covers:
Disassembly/cleaning/inspection/reassembly of manual starter .
INITIAL SETUP :
Tools:
Equipment Condition:
Motor OFF
T4 Rope starter - 378774
T5 Spring winder - 392093
Materials/Parts:
As required
Personnel Required:
Approximate Time Required (minutes):
1 Mechanic
180
LOCATION/ITEM
ACTION
REMARKS
WARNING
Safety glasses must be worn during this procedure because of danger to eyes from the rewind spring.
DISASSEMBLY
1.
Starter
Remove.
See para 3-9.
2.
Screw (1)
Remove.
3.
Pawl (2) and retainer (3)
Remove.
4.
Starter rope (4)
Pull to end of travel and tie
a slip knot 1 foot from end.
5.
Starter rope (4)
Release slowly.
6.
Rope anchor (5)
Pry out of handle (6).
7.
Handle (6)
Remove.
8.
Starter rope (4)
Release knot in rope.
9.
Starter pulley (7)
Ease back until spring (8) is
fully unwound.
10. Nut (9)
Remove.
11. Capscrew (10) and
Remove from spindle (12).
washer (11)
12. Bushing (13), friction
Remove.
Figure 4-5. Rope anchor
ring (14), and spring
washer (15)
13. Starter (16)
Turn over, legs down.
Move your fingers out of way and jar starter against
bench top. Pulley (7) and spring (8) will dislodge.
14. Pulley (7)
Lift off.
15. Rope (4)
Remove from pulley (7).
If replacing only rope, no further disassembly is
required.
4-9
|
||
|
||
