| Tweet |
Custom Search
|
|
|
||
 TM 5-2805-261-13
4-17. FLYWHEEL REMOVAL/INSTALLATION
This task covers:
Removal/installation of flywheel.
INITIAL SETUP :
Tools:
Equipment Condition:
Universal puller
Motor OFF
Materials/Parts:
As required
Clean, lint free rag
Personnel Required:
Approximate Time Required (minutes):
1 Mechanic
45
LOCATION/ITEM
ACTION
REMARKS
CAUTION
Do not let cleaning solvent
wash oil out of breaker point
oiler wick.
REMOVAL
1. Starter
Remove. (See para 3-9.)
NOTE
Use a strap wrench to hold
the flywheel (4) in place.
2. Flywheel nut (1)
Remove.
3. Capscrews (2)
Remove.
Figure 4-14. Flywheel
4. Ratchet (3)
Remove.
WARNING
You must wear safety glasses
when using the hammer. A
chip from the hammer could
strike an eye.
4-22
4-22
|
||
|
||
