| Tweet |
Custom Search
|
|
|
||
 TM 5-2805-261-13
4-22. MOTOR STOP (SHORTING) SWITCH REMOVAL/INSTALLATION
This task covers:
Removal/installation of motor stop switch.
INITIAL SETUP :
Tools:
Equipment Condition:
Motor OFF
Materials/Parts:
As required
Personnel Required:
Approximate Time Required (minutes):
One Mechanic
30
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
1. Connectors (1)
Tag and disconnect.
Depress connector clips and pull out terminals (2).
2. Capscrews and
Remove.
clamp (3)
3. Stop switch (4)
Pull through hole in engine
lower cover and remove.
4. Mounting ring (5)
Remove.
INSTALLATION
1. Terminals (2) and wires
Insert through hole and pu t
switch (4) in position.
2. Mounting ring (5)
Place in position.
Figure 4-20. Motor stop (shorting) switch
3. Capscrews and
Install on switch (4).
clamp (3)
4. Terminals (2)
Install in proper connectors
(1).
4-31
|
||
|
||
