| Tweet |
Custom Search
|
|
|
||
 TM 5-2805-261-13
LOCATION/ITEM
ACTION
REMARKS
5-9. ENGINE DISASSEMBLY/ASSEMBLY - continued
18. Eight small capscrews
Install finger-tight.
(15)
19. Taper pins (14)
Install snugly with light
This will align the crankcase to cylinder block.
taps of a hammer.
20. Large capscrews (16)
Tighten to a torque of
18-20 lb. ft. (24-27 N ).
m
21. Allen screws (18)
Tighten.
22. Large retaining ring
Install on crankshaft.
23. Lower main bearing
Place on crankshaft.
seal housing
24. Cylinder head (6) and
Position on cylinder block.
Figure 5-13. Cylinder head bolt tightening sequence
gasket (7)
25. Capscrews (4)
Install.
Install lift bracket (5) when installing capscrews (4).
26. Cylinder head cover
Position on cylinder head.
(2) and gasket (3)
27. Capscrews (1)
Install and tighten to a
torque of 14-16 Ib. ft.
(19-22 N ) Tighten in
m
the sequence shown at
right.
28. Engine
Install in exhaust housing.
See para. 5-8.
5-29
|
||
|
||
