| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-3
EQUIPMENT
MALFUNCTION
TABLE
High Lubricating Oil Consumption
External leaks
3-5-M1
Internal leaks
3-5-M2
Oil control at cylinder
3-5-M3
HYDROSTARTER
Cranking Speed Too Low
Fluid Emerges Around Rubber Boot of Hand Pump
Fluid Emerges from Ends of Starter Control Valve
when Starter is Operated
Fluid Emerges from the Reservoir Filler Cap when
Starter is Used
Hand Pump Fails to Discharge Fluid
High Pressure in System (3500 psi or above
(24, 133 kPa)
Loss of Accumulator Precharge (Nitrogen)
Loss of Fluid Pressure when Engine is not Running
Loss of Fluid from Reservoir
Loss or No Accumulator Pressure
Starter Turns but Engine Does Not
Low or High Exhaust Valve Opening Pressure
High valve opening pressure
3-9-M2
Low exhaust valve opening pressure
3-9-M1
Low Oil Pressure
Lubricating oil
3-7-M1
Oil pump
3-7-M4
Poor circulation
3-7-M2
Pressure gage
3-7-M3
No Fuel or Insufficient Fuel
Air leaks
3-4-M1
Faulty fuel pump
3-4-M3
Faulty installation
3-4-M4
Flow obstruction
3-4-M2
3-13
|
||
|
||
