| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-2
5-12.1.
ALTERNATOR (Continued)
LOCATION/ITEM
ACTION
REMARKS
TESTING (Cont)
b.
Check resistance between brush
terminal (1) and brush (4).
Ohmmeter should indicate very
low resistance (near zero).
If resistance is high, replace
brush assembly. Perform same
test between brush terminal
(2) and brush (5).
REPAIR
14. Grease
Seals and
Ball
CAUTION
Do not overpack grease seals. Excess lubricant in alternator may flow into electrical parts and cause
malfunction.
a.
Replace defective grease
seals.
b.
Repack seals if necessary
to 2/3 full with a suitable
ball bearing grease.
5-169
|
||
|
||
