| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-2
5-14. ROCKER ARMS, CAM FOLLOWERS AND PUSHRODS (Continued).
LOCATION/ITEM
ACTION
REMARKS
ASSEMBLY (Cont)
e.
Replace cam follower rollers,
using fixture J5840 as follows:
(1)
Lock the fixture securely
in a vise as shown. Then,
place the cam follower in
the groove in the top of
the fixture with follower
pin resting on top of the
corresponding size plunger
in the fixture.
NOTE
Prior to installing new rollers or pins, insure
that any burrs on the surfaces of the cam followers
at the pin holes are removed.
(2)
Position the follower
body in the groove of the
fixture with the proper
size plunger extending
thru the roller pin hole
in one of the legs of the
follower body. Coat the
roller bushing and roller
pin with engine oil.
5-289
|
||
|
||
