| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-2
5-14. ROCKER ARMS, CAM FOLLOWERS AND PUSHRODS (Continued).
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION
17. Cylinder
a. Pre-Installation Inspection.
Head
The following inspections
shall be made just prior to
installing the cylinder head
onto the engine. Make these
inspections regardless
of whether the head was
removed from the engine for
servicing only the head
assembly, or to facilitate
other repairs to the engine.
1.
Check the cylinder head
studs for damaged threads.
2.
Check for extruded areas
around the stud holes in
the cylinder block.
3.
Check the cylinder liner
height with relationship
to the cylinder block.
4.
Check to be sure the tops
of the pistons are clean
and free of foreign
material.
5.
Check to see that ALL the
push rods are threaded into
their clevises until the
ends of the push rods pro-
ject through the clevises.
This is important since
serious engine damage will
be prevented when the
engine is cranked or
barred-over during tune-up.
5-295
|
||
|
||
