| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-2
5-14. ROCKER ARMS, CAM FOLLOWERS AND PUSHRODS (Continued).
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION (Cont)
6. Check the cylinder block
and cylinder head gasket
surfaces and counterbores
to ascertain that these
sealing surfaces are
clean and free from foreign
material. Also check to
ensure that there are no
burrs or sharp edges in
the counterbores.
7. Check the four corner
plugs or drive pins used
to plug the vertical oil
galleries to ensure that
they are flush with, or
below, the top surface
of the cylinder block.
b. Install new cylinder head
gasket (14) onto block.
c. Insert lifting eye bolts
If removed.
(12) into lifting bracket
(4).
d. Insert lifting hooks into
lifting eye bolts (12).
CAUTION
Exercise care when lowering cylinder head onto
block to prevent damage to mounting studs.
e. Using a hoist, place cylinder
head (13) onto mounting studs.
Detach lifting hooks from
hoist and remove hoist.
5-296
|
||
|
||
