| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-2
5-15. CYLINDER HEAD (Continued).
LOCATION/ITEM
ACTION
REMARKS
REPAIR/REPLACEMENT (Cont)]
3.
Hold the valves in place with
a strip of masking tape and
turn the cylinder head right
side up on the work bench.
Place a board under the head
to support the valves and to
provide clearance between the
cam followers and the bench.
4.
Install the valve spring seats
(4), valve springs (3), and
valve spring caps (2).
5.
Thread the valve spring com-
Use tool J7455.
pressor into one of the rocker
shaft bolt holes in the
cylinder head.
6.
Apply pressure to the free end
of the tool to compress the
valve spring and install the
two-piece tapered valve lock (1).
NOTE
Exercise care to avoid scoring the valve stem with the valve cap when compressing the spring.
5-373
|
||
|
||
