| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-2
5-15. CYLINDER HEAD (Continued).
LOCATION/ITEM
ACTION
REMARKS
REPAIR/REPLACEMENT (Cont)l
CAUTION
Compress the valve spring only enough to permit installation of the valve locks.
Compressing the spring too far may result in damage to the valve guide oil seal
if used.
7.
Release the tool and install
the valve locks on the
remaining exhaust valves
in the same manner.
NOTE
After the valves have been installed, make sure that none of the valve heads
protrude more than the limits shown above the surface of the cylinder head when
the valves are fully closed.
5-374
|
||
|
||
