| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-38. TRANSFER GEAR ASSEMBLY (Continued).
LOCATION/ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
g. Attach the drive shaft bearing
covers (9) to the transfer gear
housing as follows:
1.
Affix a new gasket (38) to
the forward face of the
drive shaft bearing cover.
2.
Place the drive shaft
bearing cover down on the
transfer gear housing with
the bolt holes in cover in
alignment with the bolt
holes in the gear housing.
3.
Install the six 3/8"-16 X
1-1/2" self-locking bolts
(36) and flatwashers (37)
finger tight only. Do not
tighten bolts at this time.
4.
Install the second drive
shaft bearing cover in the
same manner as described
above.
6-813
|
||
|
||
