| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-39. REVERSE GEAR ASSEMBLY (Continued).
LOCATION/ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
NOTE
Immerse the clutch plate in a very light grade of engine oil for approximately one-half hour before
assembly.
ae. Thread a 3/8 inch-16 X 3 inch
pilot studs into each of two
diametrically opposite bolt
holes in the rear of the
flywheel.
af. Apply a small amount of cup
grease on one end of each
forward clutch release spring
(46). Then, insert the
greased end of the springs
into the sixteen holes in the
forward face of the drive
plate (4).
ag. Attach the forward clutch
drive plate (4) to the
flywheel by supporting the
drive plate with lifting hook
and a chain hoist and position
the drive plate (4) over the
pilot studs in the flywheel
housing. Remove the chain
hoist and lifting hook.
6-880
|
||
|
||
