| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-39. REVERSE GEAR ASSEMBLY (Continued).
LOCATION/ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
ah. Carefully slide the drive
plate (4) forward until the
release springs (46) in the
lower portion of drive plate
contact the clutch plate
(3).
ai. Raise the clutch plate (3)
just enough to permit the
release springs (46) to pass
under it, then push the drive
plate forward until the
springs contact the piston
(5).
aj. Install fourteen of the drive
plate to flywheel attaching
bolts (44) and lockwasher
(45). Remove the two pilot
studs and install the two
remaining bolts and lock-
washers. Tighten the bolts
uniformly to 30-35 ft-lb
(40.67-47.45 Nm) torque.
NOTE
Make sure the clutch plate remains free between the piston and drive plate when tightening the
bolts.
6-881
|
||
|
||
